8/17/2021»»Tuesday

Configure Vpn For Mac Os X

8/17/2021

How to configure MAC OS X for PPTP; Related information; Feedback and contact; Applies to the following Sophos products and versions Sophos Firewall How to configure MAC OS X for PPTP. Navigate to System Preferences Network and click the plus sign to create a new connection. Use the settings shown below: Interface: VPN; VPN Type: PPTP. Sophos XG Firewall: How to configure SSL VPN for Mac OS X KB-000036421 03 12, 2020 41 people found this article helpful. Overview This article describes the steps to configure the Remote Access SSL VPN for Macintosh OS X using the Tunnelblick VPN. Working to setup up a IPv4 Client-to-Gateway VPN tunnel for MacOS clients configuring the MacOS native VPN client (Network Settings, VPN Interface, Cisco IPSec type). It appears I have been successful, using an IKE Policy (though no VPN Policy appears to exists) and ModeConfig to define the pool of IPv4 addresses assigned to connecting clients. On your Mac, choose Apple menu System Preferences, then click Network.

Table of contents
  1. 1.1. Initial configurations (only once at the first time)
  2. 2.2. Start a VPN connection
  3. 3.3. Enjoy VPN communication

Here is an instruction how to connect to a VPN Gate Public VPN Relay Server by using L2TP/IPsec VPN Client which is built-in on Mac OS X.

On this instruction, every screen-shots are taken on Mac OS X Mountain Lion. Other versions of Mac OS X are similar to be configured, however there might be minor different on UIs.

These screen-shots are in English version of Mac OS X. If you use other language, you can still configure it easily by referring the following instructions.

1. Initial configurations (only once at the first time)

Click the network icon on the top-right side on the Mac screen. Click 'Open Network Preferences..' in the menu.

Click the '+' button on the network configuration screen.

Vpn

Select 'VPN' as 'Interface' , 'L2TP over IPsec' as 'VPN Type' and click the 'Create' button.

A new L2TP VPN configuration will be created, and the configuration screen will appear.

On this screen, you have to specify either hostname or IP address of the destination SoftEther VPN Server.

Audio unit plugins for mac

After you specified the 'Server Address' , input the user-name on the 'Account Name' field, which is the next to the 'Server Address' field.

Vpn For Apple Mac

Configure Vpn For Mac Os XVpn

Next, click the 'Authentication Settings..' button.

The authentication screen will appear. Input your password in the 'Password' field. Specify the pre-shared key also on the 'Shared Secret' field. After you input them, click the 'OK' button.

Configure Vpn For Mac Os X 10.13

After return to the previous screen, check the 'Show VPN status in menu bar' and click the 'Advanced..' button.

The advanced settings will be appeared. Check the 'Send all traffic over VPN connection' and click the 'OK' button.

On the VPN connection settings screen, click the 'Connect' button to start the VPN connection.

2. Start a VPN connection

You can start a new VPN connection by clicking the 'Connect' button at any time. You can also initiate a VPN connection by clicking the VPN icon on the menu bar.

After the VPN connection will be established, the VPN connection setting screen will become as below as the 'Status' will be 'Connected' . Your private IP address on the VPN, and connect duration time will be displayed on the screen.

3. Enjoy VPN communication

While VPN is established, all communications will be relayed via the VPN Server. You can access to any local servers and workstation on the destination network.