After isolating an issue on your Mac to a possible hardware issue, you can use Apple Diagnostics to help determine which hardware component might be causing the issue. Apple Diagnostics also suggests solutions and helps you contact Apple Support for assistance.
- Open Hardware Monitor For Mac
- Hardware Monitor For Mac Computers
- Hardware Monitor For Mac Laptop
- Hardware Monitor For Mac Desktop
- Hardware Monitor For Mac Windows 10
- Hardware Monitor For Mac Windows 7
Hardware Monitor for Mac is an application to read out hardware sensors in Macintosh computers. Several hundred sensors in more than 70 model series are supported. The program can display and visualize measured values in a large variety of fashions, including speech output. HWMonitor is a hardware monitoring program that reads PC systems main health sensors: voltages, temperatures, fans speed. The program handles the most common sensor chips, like ITE® IT87 series, most Winbond® ICs, and others. In addition, it can read modern CPUs on-die core thermal sensors, as well has hard drives temperature via S.M.A.R.T, and video card GPU temperature.
HWMonitor is a straightforward and useful system utility that brings to OS X’s status bar all the information regarding your Mac’s hardware components’ temperatures, fan speeds, power consumption, and CPU voltage. Read how to install HWsensor kext to read more Mac sensors. The package bundles.
Open Hardware Monitor For Mac
Aimersoft ultimate video converter for mac. If your Mac was introduced before June 2013, it uses Apple Hardware Test instead.
How to use Apple Diagnostics
- Disconnect all external devices except keyboard, mouse, display, Ethernet connection (if applicable), and connection to AC power.
- Make sure that your Mac is on a hard, flat, stable surface with good ventilation.
- Shut down your Mac.
- Turn on your Mac, then immediately press and hold the D key on your keyboard. Keep holding until you see a screen asking you to choose your language. When Apple Diagnostics knows your language, it displays a progress bar indicating that it's checking your Mac:
- Checking your Mac takes 2 or 3 minutes. If any issues are found, Apple Diagnostics suggests solutions and provides reference codes. Note the reference codes before continuing.
- Choose from these options:
- To repeat the test, click ”Run the test again” or press Command (⌘)-R.
- For more information, including details about your service and support options, click ”Get started” or press Command-G.
- To restart your Mac, click Restart or press R.
- To shut down, click Shut Down or press S.
If you choose to get more information, your Mac starts up from macOS Recovery and displays a web page asking you to choose your country or region. Click ”Agree to send” to send your serial number and reference codes to Apple. Then follow the onscreen service and support instructions. When you're done, you can choose Restart or Shut Down from the Apple menu.
Hardware Monitor For Mac Computers
Hardware Monitor For Mac Laptop
This step requires an Internet connection. If you're not connected to the Internet, you'll see a page describing how to get connected.
Hardware Monitor For Mac Desktop
Hardware Monitor For Mac Windows 10
If holding down the D key at startup doesn't start Apple Diagnostics:
Hardware Monitor For Mac Windows 7
- If you're using a firmware password, turn it off. You can turn it on again after using Apple Diagnostics.
- Hold down Option-D at startup to attempt to start Apple Diagnostics over the Internet.