8/20/2021»»Friday

Srs For Mac

8/20/2021

SRS-XB31, Connecting to 2 speakers. Many Audio problems can be fixed by updating the drivers. Plantronics Status Indicator for Windows or Mac. Introducing Sony's compact wireless speaker with the unit. This Service Manual can help you recover, restore, fix, disassemble and repair Sony SRS-X99 Audio. Software Requirements Specification for Gephi Page iv Gephi 30 April 2010 0.70 Alpha4 Gephi 1 October 2010 0.70 Gephi 8 April 2011 0.80 Alpha Gephi 4 October 2011 0.80 Gephi 31 March 2012 0.81 Gephi 3 Jan 2013 0.82 Gephi 20 December 2015 0.90 Gephi 14 February 2016 0.91.

  1. Sts For Mac
  2. Ss For Mac Config

383213GPPNRRelease 15

5.18.1 General

This subclause specifies the requirements upon reception of the following MAC CEs:

– SP CSI-RS/CSI-IM Resource Set Activation/Deactivation MAC CE;

– Aperiodic CSI Trigger State Subselection MAC CE;

– TCI States Activation/Deactivation for UE-specific PDSCH MAC CE;

– TCI State Indication for UE-specific PDCCH MAC CE;

– SP CSI reporting on PUCCH Activation/Deactivation MAC CE;

– SP SRS Activation/Deactivation MAC CE;

– PUCCH spatial relation Activation/Deactivation MAC CE;

Machine

– SP ZP CSI-RS Resource Set Activation/Deactivation MAC CE;

– Recommended Bit Rate MAC CE.

5.18.2 Activation/Deactivation of Semi-persistent CSI-RS/CSI-IM resource set

The network may activate and deactivate the configured Semi-persistent CSI-RS/CSI-IM resource sets of a Serving Cell by sending the SP CSI-RS/CSI-IM Resource Set Activation/Deactivation MAC CE described in subclause 6.1.3.12. The configured Semi-persistent CSI-RS/CSI-IM resource sets are initially deactivated upon configuration and after a handover.

The MAC entity shall:

Srs for acoustic neuroma

1> if the MAC entity receives an SP CSI-RS/CSI-IM Resource Set Activation/Deactivation MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding the SP CSI-RS/CSI-IM Resource Set Activation/Deactivation MAC CE.

5.18.3 Aperiodic CSI Trigger State subselection

The network may select among the configured aperiodic CSI trigger states of a Serving Cell by sending the Aperiodic CSI Trigger State Subselection MAC CE described in subclause 6.1.3.13.

The MAC entity shall:

1> if the MAC entity receives an Aperiodic CSI trigger State Subselection MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding Aperiodic CSI trigger State Subselection MAC CE.

5.18.4 Activation/Deactivation of UE-specific PDSCH TCI state

The network may activate and deactivate the configured TCI states for PDSCH of a Serving Cell by sending the TCI States Activation/Deactivation for UE-specific PDSCH MAC CE described in subclause 6.1.3.14. The configured TCI states for PDSCH are initially deactivated upon configuration and after a handover.

The MAC entity shall:

1> if the MAC entity receives an TCI States Activation/Deactivation for UE-specific PDSCH MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding the TCI States Activation/Deactivation for UE-specific PDSCH MAC CE.

5.18.5 Indication of TCI state for UE-specific PDCCH

The network may indicate a TCI state for PDCCH reception for a CORESET of a Serving Cell by sending the TCI State Indication for UE-specific PDCCH MAC CE described in subclause 6.1.3.15.

The MAC entity shall:

1> if the MAC entity receives a TCI State Indication for UE-specific PDCCH MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding the TCI State Indication for UE-specific PDCCH MAC CE.

5.18.6 Activation/Deactivation of Semi-persistent CSI reporting on PUCCH

The network may activate and deactivate the configured Semi-persistent CSI reporting on PUCCH of a Serving Cell by sending the SP CSI reporting on PUCCH Activation/Deactivation MAC CE described in subclause 6.1.3.16. The configured Semi-persistent CSI reporting on PUCCH is initially deactivated upon configuration and after a handover.

The MAC entity shall:

1> if the MAC entity receives an SP CSI reporting on PUCCH Activation/Deactivation MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding the SP CSI reporting on PUCCH Activation/Deactivation MAC CE.

5.18.7 Activation/Deactivation of Semi-persistent SRS

The network may activate and deactivate the configured Semi-persistent SRS resource sets of a Serving Cell by sending the SP SRS Activation/Deactivation MAC CE described in subclause 6.1.3.17. The configured Semi-persistent SRS resource sets are initially deactivated upon configuration and after a handover.

The MAC entity shall:

1> if the MAC entity receives an SP SRS Activation/Deactivation MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding the SP SRS Activation/Deactivation MAC CE.

5.18.8 Activation/Deactivation of spatial relation of PUCCH resource

The network may activate and deactivate a spatial relation for a PUCCH resource of a Serving Cell by sending the PUCCH spatial relation Activation/Deactivation MAC CE described in subclause 6.1.3.18.

The MAC entity shall:

1> if the MAC entity receives a PUCCH spatial relation Activation/Deactivation MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding the PUCCH spatial relation Activation/Deactivation MAC CE.

Rss for mac

5.18.9 Activation/Deactivation of semi-persistent ZP CSI-RS resource set

The network may activate and deactivate the configured Semi-persistent ZP CSI-RS resource set of a Serving Cell by sending the SP ZP CSI-RS Resource Set Activation/Deactivation MAC CE described in subclause 6.1.3.19. The configured Semi-persistent ZP CSI-RS resource sets are initially deactivated upon configuration and after a handover.

The MAC entity shall:

1> if the MAC entity receives an SP ZP CSI-RS Resource Set Activation/Deactivation MAC CE on a Serving Cell:

2> indicate to lower layers the information regarding the SP ZP CSI-RS Resource Set Activation/Deactivation MAC CE.

5.18.10 Recommended Bit Rate

The recommended bit rate procedure is used to provide the MAC entity with information about the bit rate which the gNB recommends. The bit rate is the recommended bit rate of the physical layer. Averaging window of default value 2000 ms will apply as specified in TS 26.114 [13].

The gNB may transmit the Recommended bit rate MAC CE to the MAC entity to indicate the recommended bit rate for the UE for a specific logical channel and a specific direction (either uplink or downlink). Upon reception of a Recommended bit rate MAC CE the MAC entity shall:

– indicate to upper layers the recommended bit rate for the indicated logical channel and direction.

The MAC entity may request the gNB to indicate the recommended bit rate for a specific logical channel and a specific direction. If the MAC entity is requested by upper layers to query the gNB for the recommended bit rate for a logical channel and for a direction (i.e. for uplink or downlink), the MAC entity shall:

1> if a Recommended bit rate query for this logical channel and this direction has not been triggered:

Format

2> trigger a Recommended bit rate query for this logical channel, direction, and desired bit rate.

If the MAC entity has UL resources allocated for new transmission the MAC entity shall:

1> for each Recommended bit rate query that the Recommended Bit Rate procedure determines has been triggered and not cancelled:

2> if bitRateQueryProhibitTimer for the logical channel and the direction of this Recommended bit rate query is configured, and it is not running; and

2> if the MAC entity has UL resources allocated for new transmission and the allocated UL resources can accommodate a Recommended bit rate MAC CE plus its subheader as a result of LCP as defined in subclause 5.4.3.1:

3> instruct the Multiplexing and Assembly procedure to generate the Recommended bit rate MAC CE for the logical channel and the direction of this Recommended bit rate query;

3> start the bitRateQueryProhibitTimer for the logical channel and the direction of this Recommended bit rate query;

3> cancel this Recommended bit rate query.

for Mac & PC v. 3.0
SRP: $79.95; iPod Adaptor: $99.95

SRS Labs USA
2509 Daimler St.
Santa Ana, CA 92705
949-442-1070
www.srslabs.com

SRS Labs is a leader in surround sound, audio and voice technologies. Their various audio enhancement technologies are used by many manufacturers and include SRS WOW, WOW HD, TruSurround XT, SRS VIP, SRS Circle Surround II and SRS Headphone. Some of these enhancements are used in HDTV displays and in entry-level audio players to provide improved sound and even surround sound from the small, basic speaker systems and electronics in such units. Now SRS offers cross-platform enhancement software to improve the sonics from computers and iPods. Until recently the iWOW software was only available for Macs, but now it has also been made available for PC users. Both versions are included in the same package. The previous v. 2.0 has just been superceded by v. 3.0, which I evaluated.

iWOW is designed to allow users to enjoy improved audio quality from either the tiny speakers built into their computer video displays, a larger but still entry-level separate speaker system, or over stereo headphones. It can restore sonic fidelity to compressed digital audio files such as MP3s, podcasts, video soundtracks and streaming music from webcasters. The user interface is quite simple. I merely dropped iWow into my iMac’s Applications Folder and it attached itself to iTunes, which then needs no further adjustment. Whenever iTunes is opened to listen to any audio sources, this display comes up on the screen and can be moved around or out of your way:

Serial number program for mac. There is a volume slider, a digital level meter, and where the pop-down says General there appears a list of various EQ settings for classical, rock, jazz, blues, country and more genres. I found the most accurate setting to be just plain General. Clicking anywhere on the SRS small screen brings up the advanced setting, allowed further customization to your particular speaker setup and your personal hearing. By the way, you can compare the iWOW effects to the untreated signal easily just by clicking on the blue ellipse just under the SRS logo.

I didn’t make any adjustments to the Advanced Controls but just A/B’d the tiny built-in speakers of my 20-inch iMac display with and without iWow, followed by feeding the analog out of my iMac to my office integrated amp and Paradigm Atom speakers plus Cambridge Soundworks subwoofer. The sound quality from the display’s tiny speakers is surprising considering the low output of the amp and their small size, plus their downward-facing orientation. However, adding the iWow processing produces a much more listenable and more stereo-conscious sound. It made even more of an improvement on the even small speakers in the keyboard of my iBook, as well as bringing up the listening level which had already been at maximum and was still often difficult to hear.

Sts For Mac

Next I plugged in my office amp and monitor speakers. I formerly had a D/A processor feeding the iMac’s digital out to the amp, but I had taken it out of the circuit because it sounded slightly better feeding the analog signal to my amp. The addition of the iWow processing made a much greater improvement in the sound than had the D/A processor. I had been living with a somewhat thin playback in my office due to having removed the stacked Atoms in order to use them in my main listening room for auditioning the 2+2+2 SACDs. With iWow, the richer, wider-range sound of the stacked speakers was recreated, and there was also a more pronounced stereo separation. I wouldn’t say the surround sound effect was immersing, but it did enhance the soundstage over the unprocessed signal. Also, my 20-inch screen is partially in the way of the sound from the two speakers across the room coming directly to me. The iWow processing adds details in the presence frequencies and makes all source material sound higher res. it is said to restore audio cues buried in the source material so music sounds more natural. If you have especially wide range tweeters on your speakers, you might want to reduce the Definition level on the Advanced Controls. iWow won a MacLife Editor’s Choice award last year, and was a top iTunes software download, so its audio enhancement has been appreciated. To summarize, I found the iWow processing to be immediately useful and practical for less than audiophile-level gear, as well as easily customizable to your needs. When I switched back to non-processed audio it sounded dull and lifeless, with instrumental and vocal lines other than the main melody buried in the muddy sonics. The only time I found I had to bypass the iWow processing was when listening to reissues of very early 78s or mono recordings. In such cases the iWow processing was too similar to the enhancement processing done on the original recordings by the remastering engineers, making the sound strident and harsh.

I don’t have an iPod (horrors!), so didn’t test the new iWow adaptor for iPods. The new software plugin is an audio management peripheral that looks like this:

and it seamlessly connects to the iPod or iPhone to deliver its enhancements over headphones or earbuds. It works with all iPods and iPhones that have the 30-pin connector, including the Classic, Nano 3G and others. It attaches to the dock connector, bypassing the headphone jack. One light-up button turns processing on or off. It is unclear whether or not the wide variety of settings and adjustments of the software iWow are available in the mobile physical unit.

Ss For Mac Config

– John Sunier